CCELL 3.0 heating is a cottonless ceramic heating generation that CCELL introduced in December 2024 for all oil types, including live resin and live rosin. It is built to lower the peak temperature of the core, and that matters for oils that lose character when a core runs hot. Treat 3.0 as a heater specification you trial against your own oil, not as a logo on the box. A battery at maximum voltage can still scorch it, and a brim fill still floods it. Start with the CCELL 3.0 hardware overview before you freeze a SKU.
Key takeaways
- CCELL 3.0 Bio-Heating is a cottonless ceramic core with 3D Stomata inlets and a Nexus Film heating layer. The 30% lower peak temperature and 50% fewer leaks and clogs are CCELL’s own claims.
- Filling discipline still decides the result: headspace, cap timing and a validated voltage matter on every 3.0 tray.
- 3.0 hardware covers cartridges, pods and all-in-ones. Name the exact SKU on the RFQ, not whatever is newest.
- Trial 3.0 against your production oil with an older-core control, and weigh leftover oil.
What CCELL 3.0 Bio-Heating changes for the filler
CCELL 3.0 Bio-Heating is CCELL’s heating platform announced in December 2024, modelled on the structure of plants. Older cores hurt live oils in two places: a hot spot that cooks top notes, and a pore or wick that clogs when oil is thick. The 3.0 design addresses both on paper, which is why it appears in so many live resin briefs.
The technology page names the building blocks. A cottonless ceramic core uses 3D Stomata inlets for one-way oil flow, and a leaf-vein Nexus Film layer spreads heat evenly. CCELL states that the design lowers peak atomisation temperature by 30% and reduces leaks and clogs by 50%. CCELL’s comparison puts peak temperature at 581F against 835F for an earlier core, so read both as manufacturer claims.
Cottonless means no fibre left to char on a long session. It does not mean you can skip headspace or brim-fill the tank. Keep cap timing and headspace on every 3.0 tray, because the heater generation does not replace fill discipline.
Which CCELL 3.0 hardware is listed
CCELL 3.0 hardware spans three formats on 3DevicesCCELL. The table groups what the hub page lists, and some all-in-ones are restricted listings that we do not link here.
| Format | Listed products | Tank options |
|---|---|---|
| 510 cartridges | Vita, Diama | 1ml, 2ml |
| Pod systems | Eazie Pod 3.0, Standard Pod and Battery, Eazie Pro and Battery | 0.5ml, 1.0ml, 2ml |
| All-in-ones | GemBox, MixJoy, GemBar, Flo, AirOne, Blade | 0.5ml to 2ml |
For the cartridges, the CCELL Vita and CCELL Diama both list 1.5Ω, a standard 510 thread, a postless tank and a BPA-free thermoplastic housing. Our guide to postless CCELL 3.0 cartridges compares them in full.
| Spec line | Vita | Diama |
|---|---|---|
| Resistance | 1.5Ω (plus or minus 0.15Ω) | 1.5Ω (plus or minus 0.15Ω) |
| Tank design | Postless, 100% transparent | Postless, diamond-cut |
| Listed diameters | 10.5mm (1ml), 14.1mm (2ml) | Up to 14.8mm |
The pod range uses the Eazie body. The CCELL Eazie Pod 3.0 Bio Heating is a 1.0ml fillable pod at 42 x 20 x 12.7mm, and the CCELL Standard Pod and Battery (CCELL 3.0) pairs a 265mAh battery with 0.5ml, 1.0ml or 2ml pods. For every format, see the CCELL 3.0 all-in-one guide.
Where CCELL 3.0 sits among the heating generations
The technology page lists five CCELL heating cores, and the table repeats their launch years and the oils each is designed for. The positioning is CCELL’s, not our own test result.
| Heating core | Launched | Designed for |
|---|---|---|
| SE ceramic | 2016 | Distillate, lower-viscosity oils |
| EVO | 2022 | Distillate, live resin, high-terpene extracts |
| EVOMAX | 2023 | All oils |
| HeRo | 2023 | Rosin and live rosin |
| CCELL 3.0 Bio-Heating | 2024 | All oils, higher capacities |
The newest generation is not automatically the right one. A distillate range on a tight margin may be well served by SE or EVO, while a range that mixes live resin, rosin and liquid diamonds may prefer one all-oil core across the line. The decision turns on oil family, fill volume and cost per unit, so write those three facts on the brief before you pick a generation.
Capacity is the other practical difference. The 3.0 cartridges, Vita and Diama, are listed in 1ml and 2ml only, so a brand that sells 0.5ml 510 cartridges today has no 3.0 cartridge at that size. The pod range does list a 0.5ml option on the Standard Pod and Battery. Check the tank sizes in the table above against your label and packaging plan before you commit, and remember that a 2ml cartridge of 14.1mm or more needs a battery that takes the wider body.
Which oils should see 3.0 first
Queue live rosin and high-terpene live resin first, put thick distillate second, and leave unnamed blends until you know the dominant fraction. CCELL positions 3.0 for all oil types at higher capacities, which is a ceiling and not a promise for your fill.
Rosin
Solventless oil on a cotton wick becomes a support ticket, while on a low-temperature ceramic it becomes a trial plan. Note that CCELL’s technology page lists a separate HeRo core built specifically for rosin, so a rosin brief should compare HeRo, EVOMAX and 3.0 rather than assume 3.0 is the only choice. Our EVOMAX vs SE comparison covers the older cores.
Live resin
Hydrocarbon live resin is a common first 3.0 trial because terpene retention is the brief. Ask for 3.0 SKUs by name on the quote, and do not accept whatever is newest. Several popular all-in-ones in the range use the EVO core, not 3.0, so the heater on the card must be confirmed against the technology page. The explainer on oil viscosity and intake aperture helps match thick oils to the cartridge.
How voltage can undo a low-temperature core
A heater designed for a lower peak still sees the power you send it. A high step on a 510 pen can push a 3.0 cartridge into the same scorched band you were trying to leave. Follow voltage by oil type even when the cartridge is labelled 3.0.
| Oil | Battery habit | 3.0 role |
|---|---|---|
| Live rosin | Lowest step | Protects the fraction you paid for |
| Live resin | Low band | Helps keep bright notes from going flat |
| Distillate | Low, then mid if needed | Even heat |
All-in-ones fire at a designed band, so you choose the device rather than a voltage dial. If an all-in-one is harsh on your rosin, change SKU instead of inventing a button combination as policy. Pods with named modes need their own ladder, and 510 voltages should not be copied onto Dart modes or Eazie Pro modes.
Public reference values (pinene near 156 C, myrcene near 167 C, limonene near 176 C at atmospheric pressure) explain why hot cores flatten top notes. They are a reason to run low, not a thermostat inside the pen. Our blog on terpenes and hardware temperature goes further.
Batteries for the wider CCELL 3.0 bodies
Some 3.0 cartridges are wider than the 10.5mm of a classic glass tank, so battery fit is part of the specification. The Vita 2ml is 14.1mm and the Diama lists diameters up to 14.8mm.
| Battery | Listed fit note | Check |
|---|---|---|
| CCELL M4 Tiny | 14mm body listed to fit CCELL 3.0 cartridges | Test-fit the Diama |
| CCELL Go Stik | Listed for 510 cartridges of any size | Test-fit any new format |
| CCELL Kap and Stylo | 510 carts up to 14mm | Diama may exceed 14mm |
Our guide on which CCELL battery fits which cartridge explains how width, thread and connection combine.
How to trial 3.0 without fooling yourself
Fill 3.0 hardware with the production oil, never a booth distillate, and use the cap clock you will use in production. A fair trial changes one variable at a time.
Run a hotter control
Keep one older-core SKU on the same oil as a control. If staff cannot tell the two apart, your oil may be simple distillate and 3.0 is optional. If they can tell them apart in one session, freeze 3.0 for that SKU, and do not cost-engineer back to an older core once the brand story is set.
Log leftover oil
Weigh leftover oil when flavour dies. A core that tastes fine but strands a third of the tank is still a poor buy.
- Same fill mass in every unit.
- Same battery and starting step.
- Notes at 25 per cent, 50 per cent and the end of the tank.
- Leftover mass at the end.
Temper cold rosin to your fill SOP before you judge the heater. Cold oil on a low voltage looks like a dead core, and people then raise the voltage and scorch a unit that was fine. Write the temper time in minutes, not until it looks runny. If units weep or clog during the trial, the cartridge leaking guide and the clogged cartridge guide list the usual causes.
CCELL 3.0 versus ceramic on a carton
Every supplier says ceramic. CCELL 3.0 is a named generation with a defined film, inlet and cottonless core, so ask for the drawing. If the drawing is a lifestyle photo, you are buying a word. Put these three lines on every RFQ:
- Is this SKU on the CCELL 3.0 heater generation?
- What oil family was it trialled on?
- What battery and voltage were used in that trial?
Our news piece on ceramic core hardware for wholesale buyers shows how to build those lines into a full brief, and CCELL wholesale UK: MOQ and how to order covers quantities. Production readiness means repeatable pores, not one hero unit, which is also why our manufacturing notes matter to a filler.
Staff cards and retail wording without overclaiming
Staff cards should say lower-temperature ceramic heating for flavour-forward oils, then stop. Do not add medical claims, guaranteed terpene percentages or lines that imply legality anywhere. If the oil is distillate, do not force a 3.0 speech.
- Low volts on the card.
- Oil family on the card.
- No health claims.
- No competitor brand names on the card.
If a display mixes 3.0 and older-core units, the talker should say to start low on the live resin SKU, because staff will demo the loudest device.
Ask for a 3.0 tray against the oil you fill
Send the oil type and fill volume through our contact form. If terpene retention is the brief, say so, and we will not assume a distillate cartridge for a rosin brand. Attach a viscosity note and tell us whether you need laser-ready parts. Hardware-by-oil grouping is also on choose hardware.
The limits are plain. A 3.0 core will not make an unlicensed oil legal, will not fix a brim fill and will not survive a high-voltage clog clearer on a box mod. We supply empty hardware only, and licences and approvals for the filled product stay with the buyer.
FAQ
What is CCELL 3.0 heating?
CCELL 3.0 Bio-Heating is CCELL’s heating platform introduced in December 2024. It uses a cottonless ceramic core with 3D Stomata inlets and a Nexus Film heating layer, and CCELL positions it for all oil types at higher capacities. Its performance figures are CCELL’s own claims.
Is CCELL 3.0 only for live resin and rosin?
No. CCELL designs 3.0 for all oil types, including distillate, live resin and live rosin. Live resin and rosin are simply where a lower peak temperature matters most. For plain distillate, an older core can be enough, so confirm with a side-by-side trial on your own oil before paying for 3.0.
Does a 3.0 cartridge fix a high voltage setting?
No. A lower-peak heater still sees the power you send it, so a high step on a 510 battery can push a 3.0 cartridge into a scorched band. Follow voltage guidance by oil type, start at the lowest step for rosin, and validate the battery you recommend.
Which batteries suit the wider CCELL 3.0 cartridges?
The M4 Tiny lists a 14mm body that fits CCELL 3.0 cartridges, and the Go Stik is listed for 510 cartridges of any size. The Diama lists diameters up to 14.8mm, so test-fit it before ordering. Kap and Stylo accept cartridges up to 14mm.
How do I trial CCELL 3.0 fairly?
Fill with your production oil, use the same fill mass, battery and starting step, and run an older-core control. Record flavour at 25 per cent, 50 per cent and the end of the tank, then weigh leftover oil. Temper cold rosin first so a cold fill is not mistaken for a weak core.
Can I buy CCELL 3.0 hardware empty for my own fill?
Yes. We supply empty CCELL 3.0 hardware from Bolton to licensed UK businesses that fill and brand their own products. Send your oil type, volumes and timeline through the contact page. Licences, approvals and labelling for the filled product remain the buyer’s responsibility.
